(+86)29-6361 0799

About Us

You are here: Home » News » Industry News » Flange introduction and their scope of application

Flange introduction and their scope of application

Views: 0     Author: Site Editor     Publish Time: 2021-05-05      Origin: Site

1.The role of the flange

Flange, also called flange flange or flange. Flanges are the interconnecting parts between pipes and pipes and are used for connection between pipe ends; flanges are also used at the inlet and outlet of equipment for the connection between two equipment, such as reducer flanges. Flange connection or flange joint refers to a detachable connection in which flanges, gaskets and bolts are connected to each other as a set of combined sealing structures. Pipe flange refers to the flange used for piping in the pipeline installation, and refers to the inlet and outlet flanges of the equipment when used on the equipment. There are holes on the flanges, and bolts make the two flanges tightly connected. The flanges are sealed with gaskets. The flange is divided into threaded connection (threaded connection) flange, welding flange and clamp flange. Flanges are used in pairs, wire flanges can be used for low-pressure pipes, and welded flanges for pressures of more than four kilograms. A gasket is added between the two flanges and then tightened with bolts. The thickness of flanges with different pressures is different, and the bolts they use are also different. When water pumps and valves are connected to pipelines, parts of these equipments are also made into corresponding flange shapes, also known as flange connections. All connecting parts that are connected by bolts on the periphery of two planes and are closed at the same time are generally called "flanges", such as the connection of ventilation pipes. This kind of parts can be called "flange parts". But this kind of connection is only a part of the equipment, such as the connection between the flange and the water pump, it is not good to call the water pump "flange parts". Smaller ones, such as valves, can be called "flange parts". The reducer flange is used for the connection between the motor and the reducer, as well as the connection between the reducer and other equipment.buy stainless steel weld neck flange- GKSTEELPIPE

2.Classification method of flange

1. According to the chemical industry (HG) industry standards: integral flange (IF), threaded flange (Th), plate flat welding flange (PL), neck butt welding flange (WN), neck flat welding flange (SO), socket welding flange (SW), butt welding ring loose flange (PJ/SE), flat welding ring loose flange (PJ/RJ), lining flange cover (BL(S)), Flange cover (BL).

2. According to the petrochemical (SH) industry standard: threaded flange (PT), butt welding flange (WN), flat welding flange (SO), socket welding flange (SW), loose flange (LJ) , Flange cover (not shown).

3. According to the machinery (JB) industry standard: integral flange, butt welding flange, plate flat welding flange, butt welding ring plate loose flange, flat welding ring plate loose flange, flanged ring plate loose flange Flange, flange cover.

4. According to national (GB) standards: integral flanges, threaded flanges, butt welding flanges, flat welding flanges with necks, socket welding flanges with necks, butt welding ring loose flanges with necks, plate flat flanges Welding flanges, butt-welding ring plate loose flanges, flat welding ring plate loose flanges, flanged ring plate loose flanges, flange covers.


WX20200430-1444172x
Phone:+86-29-63610799
WX20200430-1456132x
Address: Building B,Greenland SOHO,Xi'an,China

Products List

Quick Links

Follow Us

Contact us
Copyright 2020 GK STEEL PIPE Co., Ltd.